Mold Remediation in Las Vegas
We remove the mold and the moisture that fed it.
Mold behind cabinets, inside walls, under sinks, and around AC and swamp cooler leaks. Locally owned, owner-operated, IICRC certified, and licensed for mold remediation in Nevada.
Mold Work Is Licensed Work
Most mold calls start with a smell, a stain, or a surprise behind a cabinet during another project. You want to know two things, how far it goes and what it takes to make it right. That is what the first visit answers, with moisture readings and photos instead of guesses.
We hold a Nevada contractor license for mold remediation, and our technicians carry the Applied Microbial Remediation Technician (AMRT) certification. Our work follows the IICRC S520 standard, the industry playbook for how mold gets contained, removed, and verified. You can check our credentials yourself, licensed and insured, independently verified.
How a Mold Job Runs
Find the Moisture First
Mold is a moisture problem wearing a disguise. We trace the source with moisture meters and thermal imaging, because removing mold without stopping the water invites it back. The leak gets found before the first wall opens.
Contain the Work Area
Plastic sheeting, sealed seams, and negative air pressure with HEPA filtration keep spores inside the work zone instead of drifting through the house. Floor protection goes down before demolition starts.
Remove It, Not Hide It
Porous materials that cannot be cleaned come out in sealed bags. Surfaces that can be saved get HEPA vacuumed and treated. Painting over mold is not remediation, and we do not do it. This follows the IICRC S520 standard.
Verify, Then Rebuild
Dry readings, photos, and a documented scope close out the remediation. If you want the rebuild handled too, we manage it and coordinate the licensed trade partners who do the work. One point of contact, start to finish.
Containment Is Half the Job
Anyone can tear out drywall. The craft is in everything around the tear-out. Floor protection over the walkways. Seams taped so dust stays where it belongs. An air scrubber running the whole time the work area is open.
This is what your home looks like mid-job. Not a disaster zone, a controlled work site. Cuts are made on straight lines so the rebuild goes back clean, and the rest of your house stays your house while we work.
From an active job in the Las Vegas Valley. Floor protection and containment set before demolition.
Most Mold Grows Where You Cannot See It
This kitchen looked fine from the front. The growth was on the wall behind a cabinet, fed by a slow leak that never left a puddle. The homeowner found it by smell, not by sight.
Behind cabinets, inside wall cavities, under sinks, above ceilings. Mold favors the dark, still spots a walkthrough cannot reach, which is why we inspect with meters and imaging instead of eyes alone. If the readings say the wall is wet, we know where to look before anything gets opened.
Uncovered during cabinet removal on a Las Vegas kitchen job.
We Help You Make Sense of the Claim
We handle the insurance conversation and back it with detailed Xactimate estimates, the same platform adjusters use, so everyone is working from the same numbers and your covered damage is documented clearly. We can coordinate with your adjuster, and we explain each step in plain language so you always know where your claim stands.
Mold coverage usually turns on what caused it. Mold that follows a sudden, covered water loss, like a burst pipe, is often addressed as part of that claim, though many policies cap mold work at a set limit. Growth from long-term humidity or a leak that went unnoticed is typically excluded. That is why we document the moisture source from the first walkthrough. More on how we handle insurance claims.
Where Mold Starts in a Las Vegas Home
The desert does not make a home immune. Mold does not need a flood. It needs a small, steady moisture source and a quiet surface to live on, and Las Vegas homes have a few reliable ways of providing both.
AC and Swamp Cooler Condensation
Cooling systems here run for months without a break. A clogged condensate drain or a swamp cooler line keeps drywall damp inside a ceiling or closet long before anything shows on the surface.
Slow Leaks Under Sinks
A supply line or drain fitting that seeps a few drops a day never leaves a puddle. It soaks the cabinet base and the wall behind it, and the first sign is usually a musty smell you cannot place.
Water Heater Closets
An aging tank in an enclosed closet with no airflow is a patient moisture source. Small leaks and condensation collect at the base, and the drywall around it stays damp in the dark.
Bathrooms That Cannot Breathe
Daily showers in a room where the exhaust fan is weak or unused leave humidity with nowhere to go. Grout lines, window sills, and the ceiling above the shower take it on a little at a time.
Monsoon Rain Through the Roof
Summer storms push rain sideways into aging, sun-cracked roofs. The water wets attic insulation and ceiling drywall, and by the time a stain appears, the material above it has been damp for a while.
Water Damage That Never Fully Dried
The most common one we see. A past loss got mopped up and dried by feel instead of by meter, and the moisture left inside the wall did the rest. Drying to a documented standard is how this gets prevented. More on water damage restoration.
From Our Customers
"Prompt, honest, great work, great people. They handled the entire process smoothly and kept us updated every step of the way."
Kyle Johnson"Rockstar did an amazing job. Fast, reliable, and the end result exceeded expectations. Will definitely use them again!"
Lourdes BairesMold Questions, Answered
Do I need mold testing before remediation?
Usually not. When mold is visible, the IICRC S520 standard allows remediation to proceed based on inspection, and testing typically adds cost without changing the work. Testing earns its keep when mold is suspected but nothing is visible, or when a third-party clearance report is needed for a sale or a dispute. We will tell you honestly whether testing adds value on your job.
Is black mold worse than other mold?
Color tells you less than people expect. Many mold species look black, and the species usually meant by "black mold" does not always look black. The remediation approach is the same regardless of color: contain it, remove it, fix the moisture that fed it. People respond to mold differently, and if anyone in your home has been feeling unwell, that conversation belongs with their doctor.
Does homeowners insurance cover mold remediation?
It depends on the cause. Mold that results from a sudden, covered water loss, such as a burst pipe, is often handled as part of that claim, though many policies cap mold coverage at a set dollar limit stated in the policy. Mold from long-term humidity, maintenance issues, or a leak that went unaddressed is typically excluded. We document the moisture source from the first walkthrough, because that is what the claim turns on.
Can you just spray it or paint over it?
No, and be careful of anyone who offers to. Sprays and stain-blocking paint change what mold looks like without removing it or fixing the moisture underneath, and the growth continues behind the finish. Proper remediation removes contaminated porous material, cleans what can be saved, and stops the water source so it does not come back.
Do I have to move out during mold remediation?
Usually not. Containment and negative air pressure keep the work area sealed off from the rest of the home, and most residential jobs are limited to one or two rooms. If the affected area includes your only kitchen or bathroom, or the job is unusually large, staying elsewhere may make sense, and we will tell you that up front.
What does mold remediation cost?
It depends on how far the moisture traveled and how much material has to come out. A contained spot behind one cabinet is a different job than growth across several wall cavities. We estimate with Xactimate, the same platform adjusters use, and you see the scope and the pricing before the work moves forward.
Do you serve Henderson and the whole Las Vegas Valley?
Yes. We serve Las Vegas, Henderson, Summerlin, Spring Valley, Enterprise, Paradise, Green Valley, Southern Highlands, Centennial Hills, Boulder City, and the surrounding areas.
Found Mold in Your Home?
(702) 682-3505Call or text and talk to a person. We will tell you what you are looking at and what to do next, whether or not you hire us.
CALL NOW AND TALK IT THROUGH